Solid Oak Tree Swing Custom Made to suit your Branch Height

Oak Swing for Trees - seat seconds

Oak Swing for Trees - seat seconds
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge

£126.00 Inc VAT£99.00 Inc VAT

Product Information

CLEARANCE OFFER - MADE USING OAK SEATS WITH SMALL SPLIT IN ONE END - SEE IMAGES. We have a small number of our oak seats with a small split in them. We do not believe that this will significantly weaken the seat as it is a hardwood oak after all. However as they are not flawless we are offering them at a discount.

Solid Oak Rope Swing for trees, pergolas and porches.

A solid oak swing seat crafted from English grown oak sourced from a family run hardwood timber mill in Norfolk. The oak seat has been lightly sanded but otherwise left as nature intended, without any chemical treatment. The kiln dried oak may silver in colour over time and could contort or even split a little, all of which will enhance it's appearance.

The rope used is a 16mm synthetic hemp rope chosen for it's soft feel and natural appearance. Traditional splices by the fair hand of our own rope craftsmen have been used for the top soft splice and the tail join. The rope will not rot and is UV stabilised, so should give many years of trouble free use. As with all ropes though, it should be inspected every now and again for condition.

The seat dimensions are a generous 700mm x 240mm x 30mm. The pair of 16mm synthetic hemp ropes have an overall length of 2.5m with the tail section taking up 1m. Please note that these measurements are approximate and can vary slightly.

If you would like longer ropes than the 2.5m provided, simply purchase two more additional lengths of the 16mm synthetic hemp ropeand when checking out put a note in the 'delivery notes or comments'. Please note that you only need to purchase the additional lengths required. For example, for a swing with ropes of 4m long you will need to purchase an extra 2 x 1.5m = 3m of rope.

We have a very experienced and efficient rope team and swings will normally be despatched the day after order but in busy periods it might be a day or two later.

Solid Oak Swing hanging instructions:

1. Wrap or throw the spliced loop end over a bough and let hang down.

2. Pass the tails through the spliced loop and let the loop ride up to the bough and tighten.

3. Attach the solid oak seat to the ropes and use simple overhand knots to tighten. The knots can be adjusted to level the swing off.

4. Have lots of fun!

Product CodeSWGOAK2ND
ManufacturerRopes Direct
View products for this manufacturer
Stock Level1

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Verify you are a human

Please enter a valid email address.